Call Us 24/7 +91 - 8050023344
Head Office Whitefield Road, Bangalore - 560048
Mon - Fri: 9:30am–6pm Sat - Sun: Closed
Contact Us

Akhil Raju

Home > Author archive for Akhil Raju
Categories Products

India’s Best Swimming Pool Pumps

Are you ready to boost water circulation and filtration in your residential swimming pool? Upgrade to the PARMA Self-Priming Pump from Aqua Water Systems India Pvt. Ltd. This energy-efficient centrifugal pump, featuring a large-capacity pre-filter, ensures crystal-clear water and optimal performance.

Essential Swimming Pool Equipment List for Pool Owners

Choosing the right equipment can make all the difference when it comes to maintaining a clean, efficient, and enjoyable swimming pool. Aqua Water Systems India Pvt. Ltd., a leading provider of high-quality swimming pool equipment, brings you the cutting-edge Self-Priming Pump ‘PARMA’, a top-tier solution for water circulation and filtration in residential pools.

Experience hassle-free maintenance and superior pool care—keeping your pool clean and efficient has never been easier.

  1. Why Choose the PARMA Self-Priming Pump?
  2. Key Features of PARMA
  3. High Performance Under Challenging Conditions
  4. Technical Specifications at a Glance
  5. The Aqua Water Systems India Advantage
Why Choose the PARMA Self-Priming Pump?

The PARMA self-priming pump stands out in the market with its blend of energy efficiency, high performance, and low maintenance requirements. Let’s dive into the features that make it a must-have for any pool owner.

Key Features of PARMA

Energy-Efficient Operation: The PARMA pump is engineered to optimize energy consumption, helping pool owners save on electricity bills without compromising performance. The centrifugal design ensures smooth, efficient water movement, making it ideal for long-term use in residential pools.

Large Capacity Pre-Filter: This pump comes equipped with a large pre-filter designed to handle substantial amounts of debris before the water reaches the filtration system. This feature enhances the efficiency of your filtration system, reducing the strain on the pump and extending the lifespan of your pool’s entire filtration setup.

Durability in Harsh Pool Environments: The body and impeller of the PARMA pump are made from fiberglass-reinforced polypropylene, a material known for its resilience against chemical exposure, UV radiation, and physical stress. This makes the pump a reliable solution, even in the harshest pool environments.

Efficient Debris Filtration: Equipped with a polypropylene strainer, the pump ensures that debris is filtered out effectively, preventing blockages and maintaining the integrity of the system. This not only improves filtration but also reduces wear and tear on the pump, leading to fewer maintenance needs over time.

Transparent Lid for Easy Inspection: Maintenance is hassle-free with the PARMA pump. The transparent inspection lid allows pool owners to visually monitor the pre-filter without the need for tools. This means you can easily check the status of your pump and filter system with minimal effort, ensuring optimal performance at all times.

Advanced Mechanical Seal for Durability: The PARMA pump features a static-spring configuration mechanical seal made from Ceramic, Graphite, Viton, and Stainless Steel (SS 304). This combination ensures superior durability, improved resistance to wear, and minimal maintenance requirements. With this advanced seal, pool owners can expect long-lasting performance and reduced downtime.

High Performance Under Challenging Conditions

Operating Range: Capable of handling flow rates of up to 35 m³/h with a pressure head of up to 24 meters, the PARMA pump ensures efficient water circulation in pools of various sizes.

Temperature Tolerance: With the ability to operate at liquid temperatures of up to 50°C and ambient temperatures of up to 50°C, this pump is built to perform reliably in various climates.

Speed and Protection: Operating at 2900 rpm with an IP55 protection rating and Class F insulation, the pump is safeguarded against dust, water ingress, and temperature fluctuations

Technical Specifications at a Glance
  1. Maximum liquid temperature: 50°C
  2. Maximum ambient temperature: 50°C
  3. Flow rate: Up to 35 m³/h
  4. Pressure head: Up to 24 meters
  5. Operating pressure: Maximum 3 bar
    Speed: 2900 rpm
  6. Material: Fiberglass-reinforced polypropylene body and impeller, SS 316 shaft
  7. Protection rating: IP55
  8. Insulation class: Class F
The Aqua Water Systems India Advantage

With over 40 years of expertise in the swimming pool industry, Aqua Water Systems India Pvt. Ltd. is synonymous with quality and reliability. As the official merchant of Aqua Industrial Group, Italy, we take pride in offering state-of-the-art swimming pool equipment to customers worldwide.

Our dedication to delivering durable, energy-efficient, and high-performance products like the PARMA Self-Priming Pump has earned us a loyal customer base that values long-term solutions over quick fixes. We are committed to providing top-notch customer service and expert advice to help you select the right equipment for your pool.

The PARMA Self-Priming Pump is a standout choice for anyone looking to enhance the efficiency and longevity of their swimming pool’s circulation and filtration systems. Its advanced features, energy-efficient design, and ease of maintenance make it the perfect investment for residential pool owners who seek a hassle-free pool experience.

Ready to upgrade your pool with the best in swimming pool technology? Contact Aqua Water Systems India Pvt. Ltd. today to learn more about the PARMA Self-Priming Pump and how it can benefit your pool.

Get in contact with us right now to learn more about Self-Priming Pump, other products, and pricing, talk to our experts in Whitefield Road, Bangalore for a detailed consultation.
Call us at +91 – 8050023344, or email us at contact@aquaindia.in for any assistance. 
 
Akhil Raju September 26, 2024
Categories Products

Swimming Pool Sanitization Methods; A Detailed Analysis

This article will talk to you about swimming pool disinfection and sanitization; the disinfectants is used in swimming pools, how swimming pools are sanitized, the best ways to sanitize your pool, and all in between.

Swimming pool sanitation is essential for maintaining the health and safety of swimmers. Proper sanitation ensures clear water and prevents the spread of infectious diseases. There are various methods to sanitize swimming pools, each with its own benefits and drawbacks. In this article, we will explore five popular swimming pool sanitization methods, providing a comprehensive analysis to help pool owners make informed decisions.

What is swimming pool disinfection?

Swimming pool disinfection is the process of sterilizing the water to get rid of bacteria, parasites, and viruses. It is utilized when there have been fecal accidents, poor water samples, or when blood or vomit has gotten on the pool’s surfaces or in the water.

What is a pool sanitizer?

The water in the swimming pool is cleaned, sanitized, and made safe for swimming by a pool sanitizer. It accomplishes this by getting rid of dangerous bacteria that can make swimmers unwell. Additionally, pool sanitizers aid in preventing algae growth.

What are the best pool sanitation methods?

Let’s look at the most recommended and efficient pool sanitation techniques you may employ to maintain the cleanliness of your pool.

  • Chlorine Sanitization
  • Salt Chlorine Generators
  • Bromine Sanitization
  • Ozone Sanitization
  • Ionizers

So, which one is the best pool sanitation system? That’s the QUESTION.

Every pool is unique, as are the pool owners. Chlorine is widely accessible, inexpensive, and cost-effective. Considering these, we can say that the most common method of pool sanitation in the majority of pools is some form of chlorine. Although chlorine is common, the best pool sanitizer for you will depend on your specific pool requirements.

Remember that each sanitation technique has its own set of prices and specifications to take into account. So before you choose a system or switch to a new one, you’ll need to conduct some research and/or speak with a swimming pool maintenance expert.

#1: Chlorine Sanitization

Chlorine is the most commonly used chemical for pool sanitation. When added to water, chlorine forms hypochlorous acid and hypochlorite ions. These compounds effectively kill bacteria, viruses, and other harmful microorganisms by oxidizing them.

Advantages of Chlorine Sanitization:-

  • Chlorine is highly effective at killing pathogens, ensuring water is safe for swimming
  • Even after initial application, chlorine continues to neutralize contaminants
  • Chlorine is readily available in various forms such as gas, liquid, and solid

The disadvantages are as follows:-

  • Chlorine can form chloramines and trihalomethanes (THMs), which may cause skin and eye irritation
  • Chlorine dissipates quickly, requiring regular testing and replenishment
  • Prolonged exposure to chlorine byproducts can lead to respiratory issues
#2: Salt Chlorine Generators

Salt chlorine generators use electrolysis to convert salt and water into hypochlorous acid, which sanitizes the pool. The process recycles the salt, making it a continuous cycle of sanitization.

Advantages of Salt Chlorine Generators:-

  • Swimmers experience less skin and eye irritation compared to traditional chlorine pools
  • Salt chlorine pools generally maintain near-neutral pH levels, reducing the need for additional chemicals
  • The concentrated chlorine production helps combat chloramine buildup effectively

The disadvantages are as follows:-

  • The equipment is expensive
  • Salt cells need replacement every three to five years
  • High salt concentrations can corrode pool equipment and surfaces
#3: Bromine Sanitization

Bromine functions similarly to chlorine, forming bromamines instead of chloramines. Unlike chloramines, bromamines continue to disinfect pool water.

Advantages of Bromine Sanitization:-

  • Bromine is more stable in warm water, making it ideal for indoor pools and spas
  • Bromine has a less pungent smell compared to chlorine
  • Bromine remains effective longer, even after reacting with contaminants

The disadvantages are as follows:-

  • Bromine is more expensive than chlorine and salt
  • Bromine is a weaker oxidizer compared to chlorine
  • While less pungent, bromine’s smell is harder to eliminate
#4: Ozone Sanitization

Ozone is a powerful oxidizer created by exposing oxygen molecules to high voltage or UV radiation. It effectively breaks down contaminants in the pool water.

Advantages of Ozone Sanitization:-

  • Ozone is 100 times stronger than chlorine as an oxidizer
  • It minimizes the need for additional chemicals and maintenance
  • Ozone does not affect the pool’s pH levels

The disadvantages are as follows:-

  •  Ozone must be used immediately as it cannot be stored
  • Ozone alone cannot fully sanitize a pool and needs to be used with chlorine or bromine
  • High concentrations of ozone gas are harmful
#4: Ionizers

Ionizers release metal ions, such as copper and silver, into the water to kill bacteria. They come in two forms: electric ionizers and mineral cartridge ionizers.

Advantages of Ionizers:-

  • Ionizers require infrequent replacement of components
  • They reduce the need for many chemicals, extending the lifespan of pool equipment
  • The metal ions remain effective for a longer duration

The disadvantages are as follows:-

  • Ionizers take longer to sanitize the pool water
  • They cannot fully sanitize a pool without supplementary chlorine
  • Improper pH levels can lead to metal staining on pool surfaces

Choosing the right pool sanitization method depends on various factors such as cost, maintenance, pool usage, and personal preferences. Chlorine remains the most popular choice due to its effectiveness and availability. However, alternatives like salt chlorine generators, bromine, ozone, and ionizers offer unique benefits that may better suit certain pools and preferences.

By understanding the advantages and disadvantages of each method, pool owners can make informed decisions to keep their swimming pools clean and safe.

AQUA manufactures and supplies top-notch pool disinfection products and provides the best pool sanitization services for consumers in India. Considering your pool size, shape, and nature, we offer different types of best pool disinfection products and sanitization services.

Get in contact with us right now to learn more about our pool sanitization services, disinfection products, and pricing.

Akhil Raju 0 comments June 22, 2024
Categories Products

10 Best Pool Equipment You Need Right Now; The Ultimate List

If you are looking for a list of essential pool equipment and accessories that you need, the choices can be overwhelming. Some items are essential, some optional, and others just pure luxury. But this post is all about the swimming pool equipment you need. Nothing more, nothing less.

Essential Swimming Pool Equipment List for Pool Owners

To maintain a clean and enjoyable swimming environment, every pool owner should have these essential pool accessories and equipment. From the equipment that keeps your pool water circulating and clean to the accessories that ensure your pool remains sparkling and inviting, here’s a comprehensive list of what you need.

Here’s the list of the 10 best pool equipment and accessories you need for the ultimate pool experience.

  1. Pool Filter
  2. Leaf Skimmer
  3. Pool Brush
  4. Pool Cleaning Products
  5. Self Cleaning Filter
  6. Pool Pump
  7. Chlorine Feeder
  8. Pool Heater
  9. Pool Chemicals
  10. Maintenance Kit
#1: Pool Filter

For better water clarity and an elevated pool experience, consider these top recommended pool water filters available in India.

These filters are designed to ensure clean and safe swimming by effectively removing particles like dirt, dust, and algae. With unique designs that simplify maintenance, these filtration systems cater to various pool sizes and budgets. Owning one of the best-selling swimming pool water filtration pumps allows you to ensure excellent pool maintenance, providing a clean and safe swimming experience for years to come.

To help you achieve a pristine pool environment, we’ve compiled a list of the top 10 swimming pool filters and filtration systems of 2023. With these high-quality products, you can enjoy your pool to the fullest while keeping the water in top condition.

Explore the best pool filtration products that will transform your pool into an oasis of purity and relaxation.

  1. Aqua Combo Filtration System
  2. Aqua New Pre-Assembled Bunker Room
  3. Blow Moulded Filters “Ec 3000”
  4. Bobbin-Wound Sand Filters “Munich”N
  5. Cartridge Filter Big One

Here’s the full list of high-quality types of swimming pool filtration products.

#2: Leaf Skimmer

Leaf skimmers are essential tools for maintaining clean swimming pools by removing floating debris before it sinks to the bottom. These skimmers draw water from the surface, capturing contaminants like sunscreen, hair, leaves, and insects through the pool’s filtration system. By targeting the top layer of your pool water, they effectively prevent debris accumulation, ensuring a cleaner and more hygienic pool environment.

Check out AQUA’s Heavy Duty Surface Leaf Skimmer features.

#3: Pool Brushes

Swimming pool brushes are essential for maintaining a pristine pool environment. Our range of premium pool brushes is designed for efficient and thorough cleaning, featuring various designs including durable plastic and reinforced stainless steel options. The new deluxe vacuum brush connects easily to a Ø38 mm vacuum hose, enhancing your pool cleaning routine. Curved wall brushes, available in 45 cm, are ideal for cleaning hard-to-reach corners, while 26 cm straight wall brushes ensure thorough cleaning of flat surfaces.

For tackling tough algae, our reinforced stainless steel brushes come in both 45 cm curved and 25 cm straight models. By using these high-quality, easy-to-use brushes, pool owners can effectively remove dirt, algae, and debris, keeping their pools clean and inviting for a safe and enjoyable swimming experience.

Check out AQUA’s Deluxe Vacuum Brush features.

#4: Pool Cleaning Products

Specialized pool cleaning products help maintain the cleanliness and clarity of your pool water, ensuring a pleasant swimming experience.

We are a leading manufacturer and distributor of high-quality swimming pool cleaning and disinfectant products in India. Our range of pool cleaning products is designed to effectively combat unwanted odors and eliminate foul smells from your pool water. Using our products ensures the safety and cleanliness of your pool, as they diligently eradicate hazardous pollutants and maintain a pristine swimming environment.

Check out the most recommended pool cleaning equipment in India.

#5: Self Cleaning Filters

Self-cleaning swimming pool filters provide an efficient and hassle-free solution for maintaining clean pool water by removing suspended particles, sand, and metal particles. These filters feature a durable polypropylene head with brass inlet-outlet inserts, a transparent SAN bowl, and a brass drain valve, ensuring robust and reliable performance.

Equipped with a washable nylon filtering element, these filters make cleaning and maintenance quick and easy. Ideal for point-of-entry domestic installations, they come in various sizes to suit different needs. Additionally, an automatic valve with a programmable digital timer for an auto-cleaning system is available, featuring a 24 VDC solenoid valve that enables automatic cleaning of the cartridge element, further simplifying pool maintenance.

Check out AQUA’s Self Cleaning Filters.

#6: Pool Pump

Having a reliable swimming pool filtration system is essential for every pool owner to effectively eliminate particles like dirt, dust, and algae, ensuring a clean and safe swimming environment. In India, various swimming pool water filtration systems are available, each with its own advantages and disadvantages.

Our swimming pool filtration products stand out due to their unique design and features, which simplify regular maintenance tasks. When selecting the right filtration pump for your pool, it’s crucial to consider both the pool’s size and your budget.

Explore our best-selling swimming pool water filtration pumps.

#7: Chlorine Feeder

Our chlorine feeders are essential components of chemical dosing equipment for pools, available in both in-line and off-line models to suit various installation needs. The CL-100F and CL-200F in-line models offer direct pipe connections of 1.5″ inside and 2″ outside, ensuring a seamless integration with your pool’s plumbing.

For more flexible installation options, the CL-120F and CL-220F off-line models are designed for bypass connections via flexible tubing and come with the necessary fittings. These feeders ensure precise and efficient chlorine dosing, maintaining optimal water quality in your pool.

Check out the Chlorine Feeder.

#8: Pool Heater

A swimming pool heat pump is an energy-efficient solution for heating your pool water. Unlike traditional heaters that rely on gas or propane, a heat pump uses electricity and the ambient air to warm the water. This approach makes heat pumps significantly more energy-efficient, cost-effective, and environmentally friendly. They play a crucial role in maintaining an optimal water temperature, regardless of external conditions.

Air-to-water heating & cooling pump by AQUA Water Systems is India’s best swimming pool heat pump. Check out it’s amazing features features.

#9: Pool Chemicals

Maintaining the correct chemical balance is essential for safe and clean pool water. This includes chlorine for disinfection, pH and alkalinity adjusters, algaecides to prevent algae growth, and metal sequestrates to control metal content.

Check out the most recommended Chemical and Hygiene Dosing products

#10: Maintenance Kit

Our comprehensive maintenance kit includes everything you need to keep your pool in pristine condition. The kit features a flexible pool cleaner (C-112), a surface leaf skimmer (C-143), a curved brush (C-120), a test kit (CL-105), and a thermometer (C-150). This all-in-one solution from our range of pool cleaning products and equipment ensures efficient and effective pool maintenance.

Check out AQUA’s Maintenance Kit features.

By investing in this essential swimming pool equipment, you ensure your pool remains clean, safe, and enjoyable all season long. Happy swimming!

Get in contact with us right now to learn more about our pool heat pumps, other products, and pricing, talk to our experts in Whitefield Road, Bangalore for a detailed consultation.
Call us at +91 – 8050023344, or email us at contact@aquaindia.in for any assistance. 
 
Akhil Raju June 17, 2024
Categories Products

The Ultimate Water Treatment Technology for Your Swimming Pools

Maintaining pristine water quality in your swimming pool is essential for a safe and enjoyable experience. With the advancement of Water treatment technology for your pools, there’s a solution that surpasses traditional methods. In this guide, we’ll explore Quantum, a groundbreaking water treatment technology that promises to revolutionize the way you maintain your pool. From its features to its operation and benefits, discover why Quantum is the ultimate choice for water treatment for swimming pools.

Keeping your pool water clear, clean, and safe is crucial for an enjoyable swimming experience. That’s where Quantum comes in—a groundbreaking water treatment technology making waves in India’s pool care industry. By harnessing the power of a potent oxidizer, Quantum swiftly eliminates viruses, bacteria, and algae, ensuring your pool remains pristine and inviting. Join us as we dive deeper into how Quantum is revolutionizing pool maintenance and elevating the standards of swimming pool hygiene.

What’s in this blog?

  • Understanding Quantum pool water treatment technology
  • Operation of Quantum
  • Benefits of using Quantum swimming pool water treatment
  • How to Choose the Right Water Treatment for Your Pool?
Understanding Quantum: The Features of Water Treatment Technology
  • Combined Photocatalytic & Hydroxyl Radical Technology: Quantum utilizes the most powerful oxidizer, capable of instantly destroying viruses, bacteria, and pathogens
  • Organic Breakdown: Unlike conventional methods, Quantum breaks down organics such as sun tan oil and urea, converting them into harmless molecular forms
  • Power Options: Available in 55 Watts and 110 Watts options, catering to different flow rates and pool volumes
  • Chemical Reduction: Quantum ensures a significant reduction in chemical consumption, promoting a healthier swimming environment
  • Sea Water Compatible: Suitable for both freshwater and seawater pools, Quantum offers versatility in water treatment solutions
Operation of Quantum

Quantum introduces a brand new technology to the swimming pool industry, backed by approvals from high-profile industries such as hospitals and drinking water purification companies. Utilizing Nano Crystal technology, Quantum sterilizes water without the need for harsh chemicals. Its easy installation process and compatibility with existing setups make it a hassle-free solution for pool owners. With Photocatalytic Oxidation, Quantum destroys contaminants and ensures crystal-clear water without compromising on health.

How to Choose the Right Water Treatment for Your Pool?

Are you searching for the ideal water treatment solution to keep your pool pristine and inviting?

With various options available, it’s essential to select the right one tailored to your pool’s specific needs. Here’s a comprehensive guide to help you make the best choice.

a. Assess your pool’s needs

Start by evaluating factors such as the size of your pool, how frequently it’s used, and the desired water quality standards. Understanding these aspects will provide clarity on the type of treatment your pool requires.

b. Research available options

Explore the different water treatment solutions in the market. Traditional methods like chlorine and newer technologies such as UV, ozone, and advanced systems like Quantum offer various benefits. Each has its advantages, so research thoroughly to find the one that suits your pool best.

c. Evaluate features and benefits

Compare the features, benefits, and long-term costs of each treatment method. Consider factors like effectiveness in killing bacteria and viruses, ease of maintenance, and overall affordability. This evaluation will help you make an informed decision.

d. Seek expert advice

Consulting with swimming pool water treatment specialists and industry professionals can provide valuable insights and recommendations. They can offer personalized advice based on your pool’s unique requirements, helping you navigate through the options more effectively.

e. Consider long-term sustainability

Opt for a water treatment solution that prioritizes sustainability and environmental friendliness. Look for options that minimize chemical usage, conserve water, and ensure a safe swimming environment for years to come. Choosing a sustainable treatment not only benefits the environment but also saves you money in the long run.

By following these steps and considering your pool’s specific needs, you can choose the perfect water treatment solution that ensures crystal-clear water and a delightful swimming experience for you and your family. Make an informed decision today and enjoy your pool worry-free.

Benefits of Quantum Water Treatment
  • Enhanced Water Quality: Quantum eliminates viruses, bacteria, and pathogens, resulting in clean and safe swimming water
  • Chemical Reduction: By reducing the reliance on chlorine and hydrogen peroxide, Quantum minimizes chemical exposure for swimmers
  • Improved Comfort: Say goodbye to sore eyes, itchy skin, and strong odors. Quantum creates a comfortable swimming environment for all
  • Longevity and Reliability: With a 14,000-hour lamp life and built-in indicators, Quantum ensures consistent performance and minimal maintenance requirements
  • Safety Assurance: Quantum poses no risk to the health of bathers and pool attendants, making it an ideal choice for commercial and residential pools alike

In conclusion, Quantum represents a significant advancement in water treatment for swimming pools. With its powerful technology, reduced chemical reliance, and unmatched performance, Quantum offers a transformative solution for pool maintenance. By understanding its features, operation, and benefits, you can make an informed decision to enhance the quality and safety of your swimming pool. Choose Quantum for a cleaner, healthier, and more enjoyable swimming experience.

Get in contact with us right now to learn more about our pool heat pumps, other products, and pricing, talk to our experts in Whitefield Road, Bangalore for a detailed consultation.
Call us at +91 – 8050023344, or email us at contact@aquaindia.in for any assistance. 
 
Akhil Raju March 2, 2024
Categories Products

The Right Pool Disinfectant to Unlock Crystal-Clear Waters

When it comes to maintaining a clean and safe swimming environment, selecting the right disinfectant is crucial. With a plethora of options available in the market, finding the best swimming pool disinfectants can be daunting. In this comprehensive guide, we’ll delve into the Aqua Salt Chlorinator, a cutting-edge solution for swimming pool water disinfection. From its technical features to its benefits, we’ll explore everything you need to know to make an informed decision.

As we all know, swimming pools are a great way to relax and cool off during the hot summer months. However, the water temperature in a pool can be quite cold, even in warmer climates. This is where air source swimming pool heat pumps come in.

Understanding Aqua Salt Chlorinator

The Aqua Salt Chlorinator is a state-of-the-art device designed for both public and private pools. It comes in four versions, each offering unique features to cater to various needs. From standard models to advanced versions with pH control and chlorine modulation capabilities, the Aqua Salt Chlorinator provides unparalleled flexibility and efficiency in pool water disinfection.

Context of Use

Whether you’re a homeowner looking to maintain your backyard oasis or a facility manager responsible for a public pool, the Aqua Salt Chlorinator is suitable for all types of applications. Its compatibility with electrolytic cells of all sizes ensures seamless integration with existing swimming pool equipment. Additionally, its robust design and IP65 protection make it suitable for outdoor use in diverse environmental conditions.

Technical Features

The Aqua Salt Chlorinator boasts a range of impressive technical features, including double safety mechanisms, language selection, and real-time maintenance alarms. With a maximum chlorine production of 40 g/h and the ability to control salt concentration, pH levels, and chlorine modulation, this device offers unparalleled control over pool water disinfection. Furthermore, its user-friendly interface and compatibility with Windows-based management software make it easy to operate and maintain.

Benefits of Aqua Salt Chlorinator Swimming Pool Disinfectant
  • Efficient and consistent chlorine production for optimal pool water disinfection
  • Customizable settings for salt concentration, pH levels, and chlorine modulation
  • User-friendly interface with real-time monitoring and maintenance alerts
  • Compatibility with all sizes of electrolytic cells for seamless integration with existing pool equipment
  • Robust design with IP65 protection for durability in outdoor environments
How to Choose the Right Swimming Pool Disinfectant
  • Assess your specific requirements, including pool size, usage patterns, and environmental conditions
  • Research different disinfection methods, such as chlorine, salt chlorination, and UV sterilization, to determine the most suitable option for your needs
  • Consider the features and capabilities of various disinfection products, such as chlorine production rates, pH control, and compatibility with existing equipment
  • Evaluate the long-term costs and maintenance requirements associated with each disinfection method to ensure cost-effectiveness and sustainability
  • Seek recommendations from reputable swimming pool equipment suppliers and consult with industry experts to make an informed decision

In conclusion, choosing the best swimming pool disinfectants is essential for maintaining a clean and safe swimming environment. The Aqua Salt Chlorinator offers an innovative solution with its advanced features, customizable settings, and user-friendly interface. By understanding its technical specifications, benefits, and considerations for selection, you can make an informed decision to ensure optimal pool water disinfection. Trust Aqua Salt Chlorinator for efficient, reliable, and hassle-free pool maintenance.

Get in contact with us right now to learn more about our pool heat pumps, other products, and pricing, talk to our experts in Whitefield Road, Bangalore for a detailed consultation.
Call us at +91 – 8050023344, or email us at contact@aquaindia.in for any assistance. 
 
Akhil Raju February 28, 2024
Categories Products

A Comprehensive Guide to Choosing the Best Swimming Pool Heat Pump

When it comes to maintaining a comfortable swimming environment year-round, a reliable heat pump is a must-have for pool owners. In this guide, we’ll explore the key considerations for selecting the best swimming pool heat pump to suit your needs.

As we all know, swimming pools are a great way to relax and cool off during the hot summer months. However, the water temperature in a pool can be quite cold, even in warmer climates. This is where air source swimming pool heat pumps come in.

So, what exactly is a swimming pool heat pump?

A swimming pool heat pump is an energy-efficient method of heating the water in your pool. Unlike traditional pool heaters that use gas or propane to heat the water, a heat pump uses electricity and the surrounding air to heat the water. This makes them much more energy-efficient, cost-effective, and environmentally friendly. A swimming pool heat pump plays a vital role in maintaining optimal water temperature regardless of external conditions. By efficiently extracting heat from the surrounding air and transferring it to the pool water, heat pumps ensure comfortable swimming conditions year-round, maximizing enjoyment and usability.

How does a swimming pool heat pump work?

Swimming pool heat pumps work by using a refrigerant cycle to transfer heat from the surrounding air to the water in the pool. The process involves a series of steps, including:

  1. Air is drawn into the heat pump through an evaporator coil, which contains the refrigerant
  2. The refrigerant absorbs the heat from the air, turning it from a liquid to a gas
  3. The gas is then compressed by the compressor, which increases the temperature of the refrigerant
  4. The hot gas is then passed through a condenser coil, which transfers the heat to the pool water
  5. The hot refrigerant gas is then cooled and turned back into a liquid, ready to start the process again
What are the benefits of swimming pool heat pumps?

Here are the most important benefits of swimming pool heat pumps:-

  1. Energy Efficiency – Swimming pool heat pumps are one of the most energy-efficient methods of heating your pool. They use less energy than traditional pool heaters, which can save you money on your energy bills in the long run

  2. Cost-Effective – While the initial cost of a heat pump may be higher than a traditional pool heater, the cost of operating a heat pump is much lower. Over time, the energy savings can make up for the initial investment

  3. Environmentally Friendly – Heat pumps use electricity and the surrounding air to heat the water in your pool, making them much more environmentally friendly than gas or propane heaters

  4. Longer Swimming Season – Swimming pool heat pumps can extend your swimming season, allowing you to use your pool for more months out of the year

  5. Low Maintenance – Swimming pool heat pumps require minimal maintenance, making them a convenient option for pool owners.

Looking for the best swimming pool heat pumps in India?

Among the top contenders in the market, here’s the list of the most recommended swimming pool heat pumps in India.

  1. Air to water heating & cooling pump by AQUA Water Systems
  2. Evolution 2 Titanium Heater by Elecro

Air to water heating & cooling pump by AQUA Water Systems is India’s best swimming pool heat pump due to the exclusive features offered by this swimming pool temperature control system. With its innovative design and advanced functionalities, this swimming pool heating equipment system has earned a reputation for delivering optimal performance and reliability, making it the preferred option among discerning pool owners seeking superior comfort and efficiency. The Evolution 2 Titanium Heater by Elecro stands out for its exceptional efficiency, safety features, and reliability. 

One of the standout features of this top-tier pool temperature control system is its commitment to safety and efficiency. So, if you’re searching for a reliable, energy-efficient solution to heat your pool, look no further than AQUA’s swimming pool heat pumps. Experience the perfect blend of comfort, efficiency, and environmental responsibility with India’s best pool heat pump.

Heat pump for swimming pool
What are the major features offered by this best pool heat pump in India?
  • This pool heating & cooling device ensures complete separation of water and electricity, utilizing eco-friendly gas with no risk of fire or electricity leakage, providing a safer alternative to fuel burners or electrical heaters
  • The condenser uses titanium metal, and its corrosion resistance is 4-5 times of an ordinary copper tube, the corrosion ability of the unit is significantly improved, while the effective way to prevent fluoride leakage. So the medium of heat exchange can also contain seawater, mild industrial water, etc.
  • It utilizes refrigerants such as R407C, R410-A, and R22 in compliance with the requirements of the EU Montreal Protocol, contributing to a greener and more sustainable approach to heating and cooling
  • Utilizes heat pump technology for heating, with energy sourced from ambient air, achieving a COP of up to 5.5.
  • It ensures complete separation of water and electricity, utilizing eco-friendly gas with no risk of fire or electricity leakage, providing a safer alternative to fuel burners or electrical heaters
  • Through both mechanical and automatic control, defrosting can be operated in a shorter time to avoid severe attenuation of heating capacity in winter and not run when not necessary
How does this pool heat pump unit work?

AS A CHILLER

  • 1- STAGE ONE: The temperature of the hot gaseous refrigerant discharged from the compressor is much higher than the outside ambient air temperature. When the outside air passes across the condenser coil, the gaseous refrigerant transfers its heat to the air and condenses into liquid
  • 2- STAGE TWO: The liquid refrigerant passes through the capillary tube, reducing its pressure and temperature
  • 3- STAGE THREE: The low-temperature refrigerant passes to the heat exchanger evaporator, where the actual heat transfer takes place: the refrigerant absorbs heat from the
    water is pumped into the heat exchanger and evaporates, whereby the water temperature is reduced
  • 4- STAGE FOUR: The gas refrigerant is then sucked into the compressor and compressed, increasing its pressure and temperature, ready to start the whole cycle once again

AS A HEAT PUMP

  • 1- STAGE ONE: The heat transfer medium (the refrigerant) is colder than the outside air. As the outside air passes across the evaporator coil, the liquid refrigerant absorbs heat from the air and evaporates
  • 2- STAGE TWO: The gaseous refrigerant then passes to the compressor and is compressed. When compressed, the pressure is increased and the temperature of the vapor rises, effectively concentrating the heat
  • 3- STAGE THREE: The hot gaseous refrigerant passes to the heat exchanger condenser, where the actual heat transfer takes place: the intensely hot gaseous refrigerant transfers its heat to the water pumped into the heat exchanger and condenses back into a liquid
  • 4- STAGE FOUR: The liquid refrigerant then passes through a capillary tube, reducing its pressure and temperature, ready to start the whole cycle once again
Finding the Best Swimming Pool Products in Bangalore

In Bangalore, pool owners can rely on trusted suppliers like AQUA Water Systems for premium pool heating solutions. With their wide range of products and expertise in the field, you can ensure optimal comfort and enjoyment in your pool year-round.

Introducing the Evolution 2 Titanium Heater by Elecro

The Evolution 2 Titanium Heater by Elecro represents the pinnacle of pool heating technology. With its full titanium construction, this upgraded version offers unmatched efficiency, safety, and reliability, effortlessly heating your pool or spa to your desired temperature.

Let’s explore why the Evolution 2 Heat Pump is the ideal choice for pool owners:-

  1. Wide range of power options, catering to various pool sizes and heating requirements.
    Easy installation with pre-wiring for convenience
  2. Robust, durable construction ensures longevity and reliability
  3. Ultra-reliable flow switch and an overheating sensor for enhanced safety
  4. The compact design allows for flexible installation options
  5. Cutting-edge heating element technology ensures silent operation and 100% efficiency throughout its lifespan

AQUA swimming pool heat pumps are an excellent option for pool owners who want to heat their pool in an energy-efficient, cost-effective, and environmentally friendly way. They work by using a refrigerant cycle to transfer heat from the surrounding air to the pool water, and they offer many benefits, including energy efficiency, cost-effectiveness, and a longer swimming season. If you’re looking to heat your pool, a swimming pool heat pump may be the perfect solution for you.

Get in contact with us right now to learn more about our pool heat pumps, other products, and pricing, talk to our experts in Whitefield Road, Bangalore for a detailed consultation.
Call us at +91 – 8050023344, or email us at contact@aquaindia.in for any assistance. 
 
Akhil Raju February 15, 2024
Categories Informative

10 Most Common Types of Swimming Pools

When it comes to swimming pool varieties, the choices are as diverse as the ripples on the water’s surface. From natural pools that eschew chlorine entirely to the cozy allure of spools, which seamlessly merge the relaxation of a spa with the fun of an inground pool, the options are vast and captivating.

As we embark on this tour through the world of different types of swimming pools, it’s your chance to explore the possibilities and reflect on what truly suits your swimming pool requirements. Consider how much time, budget, and effort you’re willing to invest in creating your aquatic haven.

Let us walk you through the most common 10 swimming pool styles, each with its unique character and charm. By the end of this journey, you’ll be better equipped to make an informed decision about the pool that will transform your space into a personal oasis. So, let’s dive in and discover your perfect swimming pool match!

#1: In-Ground Concrete Pools

In-ground concrete pools, also known as gunite or shotcrete pools, are a popular choice for homeowners seeking a high degree of customization and long-lasting durability in their swimming pools.

How in-ground concrete pools are constructed?

The construction process involves meticulous planning and execution. It begins with design and excavation, followed by the placement of steel rebar or mesh for structural support. Plumbing and pool electrical equipment are integrated, and then the concrete shell is meticulously crafted using a mixture of concrete and sand sprayed onto the rebar framework. This process, known as gunite or shotcrete application, creates the pool’s shell. After curing, a finish is applied to achieve a smooth and watertight surface. Additionally, pool filtration and equipment systems are installed, and landscaping or decking is added to enhance the pool area.

How in-ground concrete pools stand out from other swimming pool types?

In-ground concrete pools stand out for their customizability, making it possible to match them to unique backyard layouts and preferences. While they do come with a higher initial cost due to the labor-intensive construction and customization options, they offer a remarkable lifespan and require less maintenance than other pool types.

The choice between concrete, fiberglass, and vinyl liner pools should be made considering factors such as budget, maintenance demands, and the desired aesthetic for your outdoor oasis. Concrete pools cater to those who value personalized design and longevity, making them a top choice for those who want a pool built to last and tailored to their specific desires.

#2: Fiberglass Pools

Fiberglass pools come pre-fabricated from the factory, with a single-piece molded fiberglass shell that is simply placed into an excavated hole at the homeowner’s location. The smooth and non-porous gelcoat finish of fiberglass pools reduces the risk of algae growth and requires minimal maintenance.

What are the pros and cons of fiberglass pools?

While they offer a variety of standard sizes and shapes, customization options with the best quality swimming pool equipment are somewhat limited as homeowners must choose from available designs. However, fiberglass pools are a cost-effective choice with a shorter installation timeline compared to in-ground concrete pools.

In contrast to their fiberglass counterparts, in-ground concrete pools are highly customizable, offering limitless design possibilities. Constructed by spraying concrete and sand onto a rebar framework, these pools are renowned for their durability and longevity, although they come with a higher upfront cost. The process includes careful planning, excavation, and the addition of plumbing and pool electrical systems, as well as a finish for a smooth and watertight surface.

Fiberglass pools, on the other hand, are a practical option for those who value efficiency and lower maintenance demands. The choice between these common pool types ultimately depends on your budget, customization preferences, and your willingness to invest in a pool that’s built to last and tailored to your specific desires.

#3: Vinyl-Liner Pools

Vinyl-liner pools are defined by their flexible PVC liner that serves as both the pool’s waterproof barrier and its visible interior surface.

How vinyl-liner pools are constructed?

The construction of these pools involves excavation to create the desired pool shape, the installation of steel or polymer panels to form the structural walls, and the placement of the vinyl liner inside the pool cavity. Plumbing and top quality swimming pool equipment are integrated, and the surrounding area is backfilled and decked for a functional pool space.

Advantages and disadvantages of vinyl-liner pools?

One notable advantage of vinyl-liner pools is their customization potential. Home owners can select from a range of liner patterns and pool sizes and shapes, striking a balance between personalization and affordability. These pools are generally cost-effective compared to in-ground concrete and fiberglass pools, making them an attractive choice for budget-conscious individuals.

However, it’s important to note that vinyl liners have a limited lifespan and may require replacement every 7-15 years, which should be considered in long-term planning. While they offer customization at an affordable price point, the choice between vinyl-liner, fiberglass, and concrete pools depends on factors like budget, design preferences, and the willingness to invest in ongoing maintenance or liner replacements.

#4: Indoor Pools

Indoor pools are an exquisite feature, bringing the joys of swimming and relaxation into any season. These popular pool styles are found in private residences, hotels, fitness centers, and public institutions and are characterized by their year-round usability, regardless of weather conditions. The construction of indoor pools mirrors that of outdoor pools but places a strong emphasis on climate control and architectural integration.

How indoor pools are constructed?

The process starts with meticulous design and planning, addressing not only the pool’s aesthetics but also the vital systems needed for ventilation, heating, and dehumidification. Excavation creates the pool’s shape and depth, but the standout difference is the construction of a structural shell to support the pool’s walls and floor. Plumbing, heating, and pool filtration systems, as well as sophisticated ventilation and dehumidification systems, are crucial to maintaining water quality and creating a comfortable indoor environment. The choice of an interior finish, such as tile, plaster, or vinyl, depends on both practical and aesthetic considerations. Most notably, indoor pools are characterized by their enclosure, consisting of walls, roofs, windows, and doors, ensuring protection from external elements while allowing for natural light and views.

Advantages and disadvantages of indoor pools?

The primary advantages of indoor pools are their year-round utility and the ability to create an architectural masterpiece within a building. However, they come with higher costs due to the need for climate control systems and complex architectural planning. The choice between indoor and outdoor pools largely depends on your climate, budget, and the desire for year-round swimming and architectural integration. Indoor pools transform swimming into an all-season luxury, offering comfort and convenience even when the weather outside is less than favorable.

#5: Infinity Pools

Infinity pools, often referred to as vanishing edge or negative edge pools, are the epitome of luxury and aesthetics in the world of swimming pools. These pools are designed to create a captivating visual illusion, with water appearing to extend endlessly into the horizon. The construction of an infinity pool involves careful consideration of location and design, typically capitalizing on scenic vistas like oceans or landscapes.

What sets infinity pools apart from other swimming pool types?

What sets infinity pools apart is the inclusion of a catch pool situated beneath the primary pool and separated by the defining overflow wall. This wall, often made of reflective materials like glass or tile, creates the illusion as water spills over it. To maintain water levels and ensure the captivating effect, a balance tank is used to recirculate the overflowed water. While the visual appeal is undoubtedly striking, infinity pools are known for their higher construction costs and increased maintenance demands compared to standard pools.

The choice between these two pool types depends on your budget, property location, and your desire for an aquatic masterpiece that complements the natural beauty of its surroundings. Infinity pools are an exquisite choice for those who value the breathtaking aesthetic experience they provide, especially when accompanied by stunning scenic views.

#6: Lap Pools

Lap pools are a dedicated swimmer’s dream, meticulously designed for one primary purpose: swimming laps. These elongated pools are characterized by their long and narrow shape, typically ranging from 25 to 50 feet in length, and 8 to 10 feet in width.

The simplicity of their design, coupled with a more streamlined filtration system, distinguishes lap pools from their multi-purpose counterparts, making them a budget-friendly option for those who prioritize aquatic exercise. The deck or coping around the pool provides a convenient area for swimmers to enter, exit, and take a breather between laps, making them ideal for daily workouts.

What sets lap pools apart is their focus on health and fitness. These pools cater to individuals seeking a dedicated space for regular exercise, without the distractions associated with recreational swimming or diving. They are also well-suited for properties with limited space, offering the opportunity to enjoy the benefits of lap swimming even in urban environments. Lap pools are a practical choice for those who value the advantages of aquatic fitness and a more straightforward pool design.

#7: Plunge Pools

Plunge pools are the epitome of small but sensational when it comes to outdoor water features. These compact pools, intentionally designed to be small and shallow, typically measure around 4 to 7 feet in diameter and 3 to 5 feet in depth.

What are the main purposes of plunge pool types?

The main purpose of these charming pools is to provide a refreshing space for cooling off, relaxation, and even hydrotherapy, making them a popular choice for those who value relaxation and rejuvenation in their outdoor space.

What sets plunge pools apart is their versatility and suitability for smaller properties. Their compact size allows them to fit into backyards with limited outdoor space, making them an ideal choice for those who may not have the room for a standard pool. Additionally, their straightforward design and less complex filtration systems result in lower construction and maintenance costs, adding to their appeal.

So, if you’re looking for an affordable and compact water feature to enhance your outdoor experience, a plunge pool might be the perfect addition to your backyard oasis, offering a delightful space for cooling off, unwinding, and even enjoying the therapeutic benefits of hydrotherapy.

#8: Natural Pools

Natural swimming pools, often referred to as swimming ponds or eco-friendly pools, offer a refreshing departure from the traditional chlorine-treated swimming experience. The defining feature of these pools is their commitment to ecological principles. They consist of two distinct zones: the swimming area and the regeneration zone.

In the swimming area, you enjoy a dip in clear, clean water, while the regeneration zone, home to aquatic plants and beneficial microorganisms, acts as a natural filter. These plants, like water lilies and cattails, thrive in the regeneration zone, absorbing impurities, and releasing oxygen, ensuring the water’s purity without the need for chemical treatments. The result is a pool that not only merges seamlessly with its natural surroundings but also stands as an eco-friendly oasis that respects the environment.

What are the main contrast between natural pools and their conventional counterparts?

The contrast between natural pools and their conventional counterparts couldn’t be more pronounced. Unlike standard pools with their chemical reliance, natural pools use plants and biological filtration to maintain water quality. The natural pool’s design emphasizes an ecological balance, creating an aesthetic harmony with nature. 

While the initial construction of natural pools may be more intricate and relatively costly due to the dual-zone system, they are a compelling choice for eco-conscious individuals seeking a chemical-free and sustainable swimming experience. 

By opting for a natural pool, you’re not just making a statement about your commitment to the environment, but you’re also immersing yourself in a serene, refreshing, and harmonious aquatic haven that’s as kind to the planet as it is to your well-being.

#9: Saltwater Pools

Saltwater pools, a popular choice among swimming enthusiasts, offer a refreshing departure from traditional chlorine-treated pools. At the heart of a saltwater pool is the salt chlorine generator, a device that converts added salt into chlorine through a process called electrolysis. This ingenious system ensures a steady supply of chlorine, providing consistent water quality without the need for manual dosing. The key advantage of saltwater pools is the feel of the water—swimmers often remark that it’s softer on the skin, gentler on the eyes, and lacks the typical chlorine odor. These pools maintain a lower, consistent level of chlorine, reducing the risk of over-chlorination or under-chlorination that can occur with traditional chlorine pools. While the initial installation costs may be higher due to the salt chlorine generator, long-term savings often materialize through reduced chlorine expenses.

Distinguish between saltwater pools and other common pool designs?

The distinction between saltwater pools and their traditional counterparts lies in the method of chlorine production. Saltwater pools rely on on-site generation, which offers convenience and consistent water quality. Maintenance requirements for chlorine are minimized, though the salt cell and generator system require occasional attention. The choice between a saltwater pool and a standard chlorine pool hinges on individual preferences, budget considerations, and the desire for a pool experience marked by softer water and a reduced chlorine presence. Saltwater pools offer the convenience of automated chlorine generation and a more comfortable swimming environment, making them an attractive choice for those who want to dive into the future of pool maintenance and water quality.

#10: Smart Pools

Smart pools are revolutionizing the way we experience pool ownership, offering a glimpse into a more convenient and tech-savvy future. At the heart of these intelligent pools is a sophisticated automation system that grants pool owners unparalleled control and customization. Whether it’s adjusting filtration, fine-tuning water chemistry, optimizing lighting, or even activating water features remotely, smart swimming pools put the power of pool management right at your fingertips through your smartphone or other devices.
 

What truly sets them apart from traditional pools is their ability to self-monitor water quality and adjust automatically, reducing the need for hands-on maintenance. Smart pools also incorporate energy-efficient equipment, from variable-speed pumps to LED lighting, to cut down on operating costs and energy consumption. While the initial investment for a smart pool may be higher, the long-term benefits are substantial, making it a forward-looking choice for those who seek convenience, energy efficiency, and advanced technology in their pool experience.

What are the key differences between smart pools and standard pools?

The key distinction between smart pools and standard pools lies in automation, control, and self-maintenance. Smart pools are designed to be more self-sustaining, continuously monitoring water quality and chemical balance while offering remote customization. The energy-efficient equipment further contributes to long-term cost savings. However, the initial investment can be more significant, reflecting the cost of the automation system and associated technology.

Ultimately, choosing between a smart pool and a traditional pool depends on your budget, technical inclinations, and the desire for a more automated and energy-efficient pool experience. Smart pools represent the next generation of pool technology, promising enhanced convenience, energy savings, and a pool experience tailored to your preferences.

When it comes to creating your dream swimming pool, it’s not just about the design and aesthetics. Equally crucial is the selection of the right swimming pool equipment. From pumps and filters to heaters and cleaners, the importance of choosing the right equipment cannot be overstated. These essential components ensure your pool remains safe, clean, and comfortable, enhancing your overall swimming experience. So, remember to consider swimming pool equipment carefully as you embark on your journey to create the perfect aquatic retreat.

AQUA manufactures and supplies the best pool equipment for our customers in India. We provide a variety of swimming pool-related services right at your door while taking into account the size, shape, and nature of your pool.

CONTACT US NOW

Know more about pool equipment?

Call Us 24/7

+91 - 8050023344

Email address

sales@aquaindia.in
aquawatersystems.italy@gmail.com
contact@aquaindia.in

WE WILL CALL YOU BACK

Drop us your details!

    Akhil Raju 0 comments October 21, 2023
    Categories Products

    Best Selling Under Water Lights For Your Swimming Pool | Full List

    In this blog, we’ll take you through everything you need to know about underwater lights, including the benefits of installing them, key factors to consider before making a purchase, and a list of the most recommended underwater lights that you can explore. So, read on to find out how you can transform your pool into a breathtaking oasis with the right underwater lights.

    Swimming pool underwater lights are a popular accessory for many pool owners. Not only do they provide an element of safety by illuminating the pool at night, but they also add an attractive visual effect to the pool environment. If you’re looking to enhance the ambiance of your swimming pool and make it more inviting, installing underwater lights is a great option to consider. Not only do they provide a stunning visual effect, but they also improve the safety and functionality of your pool.

    What are the benefits of swimming pool underwater lights?

    Swimming pool underwater lights offer a range of benefits, including improved safety, better ambiance, extended swimming hours, increased property value, and aesthetic appeal. These lights are a great addition to any swimming pool, providing safety and functionality while also enhancing the pool area’s overall ambiance. By illuminating the pool at night, underwater lights reduce the risk of accidents and make swimming after dark safer. Additionally, underwater lights can transform the pool area into a stunning and relaxing oasis, adding a touch of glamour to the environment. Overall, the benefits of swimming pool underwater lights make them a worthwhile investment for any pool owner. Let’s dive into the details.

    1. Safety

    One of the most significant benefits of underwater lights is that they provide an element of safety when swimming at night. The illuminated water allows swimmers to see the pool’s depth and any potential hazards such as toys, pool steps, or ladders.

    2. Aesthetics

    Underwater lights create a beautiful and enchanting visual effect in the pool environment. The lighting adds a unique ambiance to the swimming pool, making it a focal point in your outdoor living space.

    3. Longer Pool Hours

    The installation of underwater lights allows you to extend the use of your pool into the night. You can swim, entertain guests, or relax by the pool after dark without having to rely on exterior lighting.

    4. Energy Efficiency

    Today’s underwater pool lights are incredibly energy efficient, using LED technology to produce brilliant and long-lasting illumination. This technology can save you money on your energy bills while giving your pool the beautiful underwater lighting effect you desire.

    What are the things to consider before purchasing swimming pool underwater lights?

    Here are some of the most important attributes that you need to consider while purchasing the best under water lights for your pools.

    1. Budget

    The cost of underwater pool lights varies significantly depending on the manufacturer, quality, and technology used. Set a budget and consider the long-term costs of maintaining the lights, such as electricity and bulb replacement.

    2. Pool Size and Depth

    It’s essential to measure your pool’s size and depth accurately to determine how many lights you’ll need and where to position them.

    3. Installation

    Underwater pool lights require professional installation. Ensure that the installation process won’t damage your pool and that the installer is qualified and experienced in installing pool lights.

    4. Maintenance

    Underwater pool lights require periodic maintenance, such as cleaning the lenses and replacing bulbs. Consider the accessibility of the lights for maintenance purposes and how often you’ll need to perform maintenance.

    Best selling under water lights

    There are several best-selling underwater lights that you can consider for your swimming pool. Here are some of the most recommended options considering the above.

    1. Abs “Mini Dichro” Under Water Light

    If you own a polyester or liner pool or spa, you may be interested in underwater lights that are specifically designed for these types of pools. Fortunately, there are options available that are made of UV-resistant white ABS, ensuring that they can withstand prolonged exposure to sunlight without discoloration or damage.

    Additionally, these lights are easy to disassemble when the lamp needs to be replaced, with the outer side of the frame serving as a key to facilitate the process. Moreover, they come with an IP 68 protection rate, indicating that they are completely sealed and waterproof, making them safe for use in underwater environments.

    2. Abs Led Flat Light

    If you’re looking for a reliable and efficient underwater lighting solution, consider lights made of super bright LED with high quality. These lights are acid-proof, alkali-proof, and UV resistant, ensuring durability and longevity. They are also 100% waterproof due to being filled with epoxy inside using a unique resin filling technique with a waterproof level of IP68. These lights offer constant color and brightness, and have protection against over electricity and electric surges, ensuring stability and safety.

    With low power consumption, these lights are energy efficient and have a long working life of up to 60,000 hours. Additionally, they are easy to install and suitable for both concrete and liner structures (installation kit not included), with a cable length of 4m H07RN-F 2×1.0 2mm. Overall, these LED underwater lights are an excellent choice for pool owners who want a reliable and long-lasting lighting solution.

    3. Abs Under Water Light

    If you’re looking for a durable and high-quality underwater light for your pool, consider those made of top-quality ABS materials with UV-resistant additives. The front part of these lights is fixed with stainless steel claws for a stronger grip and longer life, ensuring their longevity and stability. Additionally, these lights come with a niche with a back thread of 3/4″, which also has an optional marked hole for rear connection.

    The lights come with a very soft and water-tight cable of 2.5 meters of length, along with a water-tight gland and a corrugated tube of 1 meter. These lights also come in a variety of colors, with options for brass inserts or self-threading. For panel pools, they feature sandwich seals to ensure maximum protection. These underwater lights are CE certified and offer IP68 protection, ensuring complete waterproofing and safety. Overall, these lights are an excellent choice for pool owners who want a reliable and long-lasting lighting solution.

    4. Aqua Luxe Underwater Lights

    If you’re in the market for a versatile and reliable underwater light for your pool, consider ABS lights PAR56, which are suitable for both liner and concrete pools. These lights come with a 12V AC lamp (standard 300W and LED options are also available), along with a kit that contains the light body, light box with connector, power derivation box CEI approved with connector, and flexible hose protector.

    For panel installation without a sandwich gasket, a length of 2.5 meters is provided. The kit also comes with an installation kit suitable for the desired type of structure, whether it be a liner or concrete pool. These underwater lights boast an IP68 protection rate, ensuring that they are completely sealed and waterproof, making them safe for use in underwater environments. Overall, these ABS lights PAR56 are an excellent option for pool owners looking for a versatile and reliable lighting solution.

    AQUA manufactures and supplies top-notch swimming pool under water lights for consumers in India. It provides many benefits, including safety, aesthetics, longer pool hours, and energy efficiency. Before making a purchase, consider your budget, pool size and depth, installation process, and maintenance requirements. If you’re looking for an excellent addition to your pool’s ambiance and safety features, then AQUA India’s underwater pool lights are an excellent choice

    Get in contact with us right now to learn more about our pool underwater pool lights, other products, and pricing.

    Akhil Raju 0 comments March 18, 2023
    Categories Products

    Best Steam Sauna Jacuzzi Manufacturers and Suppliers in India

    A steam sauna jacuzzi is a combination of a steam sauna and a jacuzzi, also known as a hot tub. The steam sauna is a small room or enclosure designed to provide a steam bath experience. The jacuzzi, on the other hand, is a large bathtub or pool filled with hot water and equipped with water jets for massage.

    Spas have become a popular way to relax, unwind and rejuvenate after a long day or week of work. Among the many spa treatments available, steam sauna and jacuzzi are two of the most popular. Together, they provide the ultimate spa experience. In this blog, we’ll explore what a steam sauna jacuzzi is, how it works, and its benefits.

    How Does a Steam Sauna Jacuzzi Work?

    The steam sauna works by heating water and producing steam, which is then directed into the enclosed space. The high humidity and warmth created by the steam help to open up the pores and relax the muscles, providing a deep cleansing and relaxing experience. The jacuzzi works by filling the pool with hot water and using jets to create a relaxing massage effect on the muscles.

    What are the benefits of a Steam Sauna Jacuzzi?

    Here are the most important benefits of Steam Sauna Jacuzzi:-

    1. Relaxation – Steam sauna and jacuzzi are both known for their relaxation benefits. They help to relieve stress and tension in the muscles and promote overall relaxation

    2. Skin Health – Steam sauna helps to open up pores, allowing for deep cleansing of the skin. Jacuzzi water jets also help to increase blood flow, providing a healthy glow to the skin

    3. Pain Relief – The combination of steam sauna and jacuzzi can help to relieve pain in the muscles and joints. The warm water and massage effect from the jacuzzi water jets help to soothe sore muscles, while the high humidity in the steam sauna helps to reduce inflammation

    4. Detoxification – Steam sauna helps to open up pores and sweat out toxins from the body. The high humidity also helps to promote the removal of toxins through the skin

    5. Improved Sleep – The relaxation benefits of a steam sauna and jacuzzi can help to improve sleep quality. The warm water and massage effect from the jacuzzi water jets help to calm the body, while the steam sauna helps to reduce stress and tension

    AQUA India’s steam sauna jacuzzi provides the ultimate spa experience, offering relaxation, skin health, pain relief, detoxification, and improved sleep. If you’re looking for a way to unwind and rejuvenate after a long day, a steam sauna jacuzzi may be just what you need. So, go ahead, indulge yourself in the ultimate spa experience and reap the benefits for your mind, body, and soul.

    Get in contact with us right now to learn more about our steam sauna jacuzzi, and pricing.

    Akhil Raju 0 comments March 10, 2023
    Categories Informative

    All Swimming Pool Related Queries Answered

    Check out all the answers to your swimming pool maintenance and related questions. Whether it is about taking care of a pool, adding the correct amount of chemicals, changing filters, etc., we have all your doubts covered.

    Let’s learn something new today!

    What is the ideal size of a swimming pool for residential purposes?

    The ideal size for your swimming pool is the one that fits your backyard the best. The swimming pool shape depends on the size of your yard and the shape of the lot. But still, if you are looking for a possible number, then the smallest swimming pool that may be built typically has a water area of 150–200 square feet. This can be easily constructed in a 500-square-foot space.

    How long does it take to build a pool?

    The time period varies according to your pool requirements. On average, it may take 2-6 months to construct a standard swimming pool.

    Why are the water and chemical levels in my pool critical?

    Your pool may be kept at the proper levels to provide a secure and healthy swimming environment. A lack of chemicals or chlorine can foster the growth of bacteria and lead to unhygienic circumstances.

    Why my pool water is looking cloudy?

    If your pool water is cloudy, there could be contaminants in the pool including suntan lotion or shampoos, or conditioner residues from people who were using the pool lately. Also, the cloudy color can be because of your filtration system malfunction.

    Do I still need to brush my pool even though my pool is equipped with an automatic pool cleaner?

    Even though most pools are equipped with an automatic pool cleaner, most won’t scrub, especially not thoroughly. Brushing your pool can help remove algae or any other small particles from the pool’s surface.

    Why should I shock my swimming pool after a storm or heavy rain?

    If a pool is left open during a downpour or storm, shock it later to get rid of the contaminants. After a very busy bathing period, shocking your pool is also a good idea. Therefore, shocking the water after a pool party will help remove bacteria and pollutants if the water becomes impure over the weekend.

    How long after a chemical shock treatment should I wait before using my pool?

    It is better to wait up to around 10 hours before using your swimming pool after applying chemical water treatments. The optimal time to shock a pool is in the late afternoon, allowing the system to operate through the night.

    Why is my pool green?

    The main reason for the green color in your pool water is because of the algae growth from phosphates or metals in the water.

    How frequently should the skimmer and pump baskets be cleaned?

    Water circulation is impeded by clogged skimmers and pump baskets, which can lead to problems like the pump overheating or skimmer basket damage. Simply checking the skimmer and pump baskets each day and clearing out any debris you find is the best form of prevention.

    What are the accurate pH and alkalinity levels for my pool?

    Maintaining the right pH is important because failing to do so, will lead to bacteria and algae, which eventually make the water unhealthy. The pH of the water in your pool must be between 7.4 and 7.6. There should be 80 to 120 parts per million of total alkalinity (ppm).

    What is the best way to maintain my pool lighting?

    Cleaning the light covers, changing out burned-out bulbs, and preventing leaves and other debris from touching the lights are the best ways to preserve pool lighting.

    Why is my pool losing water?

    Pool water can evaporate up to 3/4 inch per day, depending on the time of year, and this is totally natural. However, if the water loss from the pool is considerable, there may be a leak. Call your pool specialist right away to request a service.

    Does my salt-water swimming pool require chlorine?

    You shouldn’t need to use as much chlorine as you would in a typical swimming pool because saltwater pools produce their own chlorine. Your pool might occasionally need to be shocked, though. It is still crucial to keep all other chemical parameters including pH, alkalinity, and calcium hardness at the right values.

    AQUA manufactures and suppliers the best pool equipment for our customers in India. We provide a variety of swimming pool-related services right at your door while taking into account the size, shape, and nature of your pool.

    Get in contact with us right now to learn more about our pool sanitization services, disinfection products, and pricing.

    Akhil Raju 0 comments January 10, 2023